Описание
Полусинтетическое масло Suzuki Marine 4 Stroke Engine Oil 10W40 5L
Полусинтетическое масло Suzuki Marine 4 Stroke Engine Oil 10W40 5L
SUZUKI MARINE GENUINE OIL – полусинтетическое смазочное масло, специально разработанное для бензиновых 4-тактных подвесных двигателей SUZUKI.
Марки 10W-30 и 10W-40
Полусинтетическое исполнение
Одобрение NMMA FC-W
Высокая вязкость HTHS
Превосходная защита от коррозии и окисления
Противопенные и противозасоряющие свойства.
SUZUKI MARINE
4 stroke engine oil 10W-40
Lubricant for marine 4 Stroke engines Gasoline engines
Semi-Synthetic
TYPE OF USE
Semi-synthetic lubricant specially designed for use in SUZUKI Gasoline 4 Stroke outboard engines
running under severe conditions, calling for NMMA FC-W lubricants.
PERFORMANCES
STANDARDS API SL
APPROVALS NMMA FC-W under n° FB-13852W
FC-W standard, specially developed for lubricant intended for use in marine engines, is more stringent
than requirements for standard marine oils on following points:
— Higher HTHS viscosity at 150°C to ensure better oil film resistance at high temperature and absorb
fuel dilution produced during long idling period.
— 40 viscosity grade at hot temperature for severe conditions and warm climates.
— Better shear resistance to maintain lubricant performance at high temperature.
— Outstanding anti-corrosion properties to avoid corrosion due to sea water or salt water fog that can
reach combustion chamber through exhaust pipe. Better anti-corrosion performance during wintering
periods.
— Keep lubricant original properties even contaminated by sea water.
— Better oxidation resistance.
— Anti-foam properties to avoid foaming and air bubbles introduction into oil circuit.
— Anti-clogging properties to protect oil filters.
RECOMMENDATIONS
Drain interval: according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral oils.
PROPERTIES
Viscosity grade SAE J 300 10W-40
Density at 20°C (68°F) ASTM D1298 0.860
Viscosity at 40°C (104°F) ASTM D445 93.1 mm²/s
Viscosity at 100°C (212°F) ASTM D445 14.2 mm²/s
Viscosity index ASTM D2270 157
Flash point ASTM D92 228°C / 442°F
Pour point ASTM D97 -39°C / -38°F
TBN ASTM D2896 7.4 mg KOH/g
